# RDP Connection Debugging — Handoff Doc

## ✅ WORKING NOW (2026-06-22) — XFCE over xrdp, full input + 1080p

RDP through ArchNest works end-to-end on the test Fedora VM (`192.168.122.55`, user
`sam`) with the **XFCE** desktop. Confirmed by the user: logged in, desktop renders,
mouse + keyboard work, 1080p. The full chain of fixes that got it there (each was a
separate blocker, each its own deployed PR):

1. **Auth/security (PR #41):** gnome-remote-desktop mandates NLA, which guacd's FreeRDP 2
   can't do → replaced it with **xrdp** on the VM (xrdp interoperates with guacd FreeRDP 2).
2. **Desktop session (PR #42):** GNOME 50 is Wayland-only and won't run on xrdp's Xorg
   backend → installed **XFCE** + created `/etc/xrdp/startwm.sh` to launch it.
3. **Rendering (PR #43):** blank despite XFCE running → disabled xfwm4 **compositing**
   (`use_compositing=false`) + `LIBGL_ALWAYS_SOFTWARE=1` (no GL on the Virtio GPU).
4. **Display scaling (PR #44):** client scaled the Guacamole display to the panel.
5. **Connection stability (PR #46):** ArchNest backend now **echoes the guacamole-common-js
   tunnel `ping`** (`0.,4.ping,...`) that `guacamole-lite` 1.2.0 wrongly forwarded to guacd,
   which fixed the flicker→drop→reconnect loop ("User is not responding"). See `guacamole.ts`.
6. **Input (PR #47):** wired `Guacamole.Mouse` (scaled coords) + `Guacamole.Keyboard` in
   `RemoteDesktop.tsx` — the display rendered but no input was captured before this.
7. **Default resolution (PR #48):** guacd `connectionDefaultSettings` now 1920x1080.

ArchNest connection setting that works: **Security = `any`** (blank also fine). `nla`/`rdp`
do not work against xrdp's default config.

## ⚠️ Desktop environment support matrix (the open task)

**Goal (from the user): get GNOME and KDE working too, on latest versions — not just XFCE.**

| Desktop | Over xrdp (X11 backend) | Over native Wayland RDP | Works with guacd (FreeRDP 2)? |
|---|---|---|---|
| **XFCE** | ✅ works (current setup) | n/a (X11 DE) | ✅ yes, via xrdp |
| **KDE Plasma 6** | ✅ should work via `startplasma-x11` (X11 session still shipped through ~early 2027) | KRdp (Wayland) — newer, finicky | ✅ via xrdp X11 session; ⚠️ via KRdp |
| **GNOME 50** | ❌ no Xorg session exists (Wayland-only) — xrdp can't launch it | gnome-remote-desktop **mandates NLA** | ❌ blocked both ways with FreeRDP 2 |

### Why GNOME is the hard one (verified on the VM, not theory)

- GNOME 50 ships **only Wayland sessions** (`/usr/share/xsessions/` has no `gnome*.desktop`;
  only `gnome.desktop`/`gnome-classic.desktop` under `wayland-sessions/`). So the xrdp route
  that works for XFCE/KDE-X11 **cannot launch GNOME** at all.
- GNOME's own Wayland RDP (`gnome-remote-desktop`) **requires NLA** and `grdctl` exposes no
  way to disable it (`set-auth-methods` only accepts `credentials`/`kerberos`, both NLA).
  guacd's FreeRDP 2 can't complete that NLA handshake → "wrong security type". Confirmed again
  this session: `grdctl --help` shows no TLS-only/disable-NLA option in v50.1.

### Researched paths to make GNOME work (pick when picking this up)

1. **Best long-term: get FreeRDP 3 into guacd.** FreeRDP 3 *can* do gnome-remote-desktop NLA.
   Apache's official `guacamole/guacd` images (1.5.5 **and** 1.6.0) still ship FreeRDP **2.11.x**,
   so this needs a **custom guacd image built against FreeRDP 3** (guacamole-server has FreeRDP-3
   build support; ~30-min from-source build to maintain in `docker-compose.yml`). This would
   unblock GNOME's native Wayland RDP *and* is the cleanest fix for any modern GNOME/Ubuntu 24.04+
   target other ArchNest users hit. **Recommended primary direction.** Validate by rebuilding the
   guacd service and re-running the `security=nla` connect test against gnome-remote-desktop.
2. **GNOME headless "system" RDP (GNOME 46+/48+), the *intended* modern path.** `gnome-remote-desktop`
   has a **system daemon + GDM handover** mode (a separate path from the per-user
   `gnome-remote-desktop.service`; note the VM already has a `gnome-remote-desktop-configuration.service`
   unit present but disabled). It starts a headless GNOME Wayland session on connect, no monitor
   needed. BUT it still negotiates NLA, so it only helps **once guacd has FreeRDP 3** (path 1).
   Refs: SUSE "Headless remote sessions in GNOME" parts 2–3; jamesnorth.net GRD setup; RHEL 10
   "Administering RHEL by using the GNOME desktop" → remote desktop on headless server.
3. **Fallback that works with FreeRDP 2 today: don't use GNOME's RDP at all — run a GNOME
   *Xorg* session under xrdp.** Requires installing the GNOME-on-Xorg session
   (`gnome-session-xsession` / the classic Xorg session package) so a `gnome.desktop` appears in
   `/usr/share/xsessions/`, then point `startwm.sh`/`~/.xsession` at `gnome-session`. On Virtio GPU
   also force software GL (`LIBGL_ALWAYS_SOFTWARE=1`) and expect GNOME Shell to be heavy without
   GPU accel — GNOME Classic or "GNOME on Xorg" is lighter. Fedora has been **dropping** the GNOME
   Xorg session, so this may not be installable on 44+; verify availability first. Lower priority.

### KDE Plasma 6 (should be straightforward, same pattern as XFCE)

- KDE is **not installed** on the VM yet. Two routes:
  - **xrdp + Plasma X11 session (recommended now):** install Plasma, ensure `startplasma-x11`
    exists, point `startwm.sh`/`~/.xsession` at it (`exec startplasma-x11`). Same model as XFCE;
    works with guacd FreeRDP 2. Plasma keeps the X11 session through ~early 2027 (Plasma 6.8 goes
    Wayland-only). May also need compositing tweaks on the Virtio GPU (KWin: `export
    KWIN_COMPOSE=Q` for software/XRender, or disable compositing) to avoid a black screen.
  - **KRdp (native Wayland, future-proof):** Plasma 6's own Wayland RDP server. Newer, has its own
    black-screen/portal pitfalls, and (like gnome-remote-desktop) check its NLA behavior against
    guacd FreeRDP 2 before relying on it. Prefer once guacd has FreeRDP 3.

### Suggested order of work for the next agent

1. Build & wire a **FreeRDP-3 guacd image** (path 1) — unblocks GNOME natively and benefits all
   users. Test against the VM's gnome-remote-desktop with `security=nla`.
2. Install **KDE Plasma** on the VM and prove the **xrdp + `startplasma-x11`** route (quick win,
   no guacd change needed). Document the compositing/GL tweak if a black screen appears.
3. Only if FreeRDP 3 lands: enable **GNOME headless system RDP** and validate end-to-end.
4. Make the desktop/session choice per-host configurable rather than a global `startwm.sh`
   (e.g. xrdp session-select, or per-user `~/.xsession`) so one VM can offer XFCE/KDE/GNOME.

---

## ✅ RESOLVED (2026-06-22) — root cause found, proven end-to-end

**Root cause: guacd 1.5.5 ships FreeRDP 2.11.5, whose NLA/CredSSP client cannot
complete authentication against gnome-remote-desktop, which *mandates* NLA.**

Proven at every layer (not a theory — the EGL/Mesa/Zink hypothesis below was a red herring):

1. **Server mandates NLA.** Direct `xfreerdp` (v3) from the Fedora VM to its own
   gnome-remote-desktop returns, for `/sec:tls` and `/sec:rdp`:
   `[WARN][com.freerdp.core.nego] Error: HYBRID_REQUIRED_BY_SERVER [0x00000005]` →
   `Protocol Security Negotiation Failure`. `grdctl rdp set-auth-methods` only offers
   `credentials` (NLA) and `kerberos` — **there is no non-NLA / plain-RDP mode** to turn off.
2. **guacd's FreeRDP 2 can't do NLA against it.** Driving the *real* guacd path
   (guacd 172.18.0.2:4822 → VM) with `security` = `nla`, `tls`, `rdp`, AND `any` all return
   the identical Guacamole error `Server refused connection (wrong security type?)` (code 519).
   guacd's own log confirms it tried correctly: `Security mode: NLA` … then
   `RDP server closed/refused connection: Server refused connection (wrong security type?)`.
   The fact that all four modes fail *identically* was the tell — it's not a mode mismatch,
   it's that FreeRDP 2's CredSSP handshake is incompatible with gnome-remote-desktop's.
3. **Bumping guacd does NOT fix it.** `guacamole/guacd:1.6.0` still ships FreeRDP **2.11.7**
   (verified by inspecting the image). FreeRDP **3.x** is what fixes gnome-remote-desktop NLA
   interop, and Apache's guacd image doesn't ship FreeRDP 3 yet. So an image bump is wasted.

### Fix / recommendation (general — other ArchNest users will hit this)

gnome-remote-desktop is **not a reliable RDP target for guacd-based gateways** (this affects
Fedora/Ubuntu 22.04+ desktops using GNOME's built-in "Remote Desktop"). The fix applied here,
plus the alternative considered:

- **Applied & verified (operational, per-VM): replaced gnome-remote-desktop with `xrdp`** on
  the test VM. xrdp's RDP-security path interoperates with guacd's FreeRDP 2. Steps run:
  `sudo dnf install -y xrdp && sudo systemctl enable --now xrdp`; then disabled + **masked**
  gnome-remote-desktop's user service (`systemctl --user mask gnome-remote-desktop.service`)
  and killed the lingering daemon that was still holding port 3389 so xrdp could bind it.
  Verified end-to-end through the real guacd path: with `security=any`, guacd authenticates and
  streams live desktop frames. **`security` MUST be `any` (or blank → defaults to `any`)** for
  xrdp's default config — `nla` fails (`Security negotiation failed`) and `rdp` errors out.
  Note: xrdp gives a fresh X login session, not a takeover of the existing Wayland session.

  **Gotcha (connected-but-blank screen):** after installing xrdp you may connect successfully
  but see a blank/black screen. Cause: **GNOME 50 on Fedora is Wayland-only** (no Xorg session
  in `/usr/share/xsessions/`), so it cannot run on xrdp's Xorg backend — the session starts and
  dies in ~2s (`xrdp-sesman` logs `Session on display N has finished`). Fix: install a
  lightweight **X11** desktop and point xrdp at it:
  ```bash
  sudo dnf install -y @xfce-desktop      # XFCE: X11, no GL needed, reliable over xrdp
  # /etc/xrdp/startwm.sh was missing on this VM — create it:
  sudo tee /etc/xrdp/startwm.sh >/dev/null <<'WM'
  #!/bin/sh
  [ -r /etc/profile ] && . /etc/profile
  export XDG_SESSION_TYPE=x11
  export XDG_CURRENT_DESKTOP=XFCE
  exec startxfce4
  WM
  sudo chmod +x /etc/xrdp/startwm.sh
  sudo systemctl restart xrdp-sesman xrdp
  ```
  Verified: `xfce4-session` + `xfwm4` stay running and guacd streams sustained desktop frames.

  **Second gotcha (still blank even with XFCE running):** if all XFCE processes
  (`xfce4-session`/`xfwm4`/`xfdesktop`) are alive but the screen is still blank, it's xfwm4's
  **GPU compositor** failing on a GPU with no GL driver. Tell-tale lines in `~/.xsession-errors`:
  `xfwm4-WARNING: Another compositing manager is running on screen 0`,
  `glx: failed to create dri3 screen`, `failed to load driver: virtio_gpu`. Fix — disable xfwm4
  compositing and force software GL for the RDP user, then reconnect (kill the stale session
  first so it respawns):
  ```bash
  mkdir -p ~/.config/xfce4/xfconf/xfce-perchannel-xml
  cat > ~/.config/xfce4/xfconf/xfce-perchannel-xml/xfwm4.xml <<'XML'
  <?xml version="1.0" encoding="UTF-8"?>
  <channel name="xfwm4" version="1.0">
    <property name="general" type="empty">
      <property name="use_compositing" type="bool" value="false"/>
    </property>
  </channel>
  XML
  # force llvmpipe so any GL app falls back to software instead of failing on virtio_gpu
  sed -i '1a export LIBGL_ALWAYS_SOFTWARE=1' ~/.xsession
  sudo pkill -u "$USER" xfce4-session; sudo pkill -u "$USER" Xvnc   # then reconnect
  ```
  Verified: fresh session has zero "Another compositing manager" errors and guacd streams a
  clean rendering desktop. This is the likely culprit on any VM with a Virtio/virtual GPU.
- **Alternative (infra, affects everyone): a custom guacd build with FreeRDP 3.** Not worth it
  yet — it's a 30+ min from-source build to maintain in `docker-compose.yml`, for one upstream
  gap that Apache will eventually close. Revisit if/when `guacamole/guacd` ships FreeRDP 3.

No ArchNest code change was required — the `security` field + `ignore-cert` handling in
`backend/src/routes/guacamole.ts` (added earlier this debugging arc) are correct and remain
useful for other RDP servers. The blocker was purely the guacd↔gnome NLA incompatibility.

The original investigation notes below are kept for history.

---

## Goal

ArchNest is a self-hosted dashboard product. One of its integrations is a "Remote Desktop"
connection type that proxies RDP/VNC/Telnet sessions through `guacd` (Apache Guacamole's
proxy daemon) so users can open a remote desktop session in the browser. This needs to work
reliably for *any* user's RDP server, not just this one — so the immediate goal is to get
this specific connection working, but treat every root cause found as a potential general
fix (config option, docs, code change) since other users will hit the same servers
(gnome-remote-desktop, xrdp, Windows RDP, etc).

**You have hands-on access to both machines involved.** Use that — actively connect to both,
run diagnostics on both sides simultaneously, and correlate logs/timestamps. Do not guess from
one side alone; multiple times in this debugging session, a theory formed from only one
machine's logs turned out to be wrong once the other machine's logs were checked.

## The two machines

1. **`racknerd-712b73a`** — the VPS running the ArchNest stack (this repo) in Docker.
   - Container `archnest-backend` — the Node/Fastify backend. Route of interest:
     `backend/src/routes/guacamole.ts` — bridges a browser WebSocket to `guacd` using
     `guacamole-lite`'s `ClientConnection`/`Crypt` classes. Builds a Guacamole connection
     token (protocol, hostname, port, username, password, domain, security, ignore-cert)
     and hands it to `guacd`.
   - Container `archnest-guacd` — Apache Guacamole's `guacd` (v1.5.5), the proxy daemon that
     actually speaks RDP/VNC/Telnet to the target. Listens on port 4822. On the
     `archnest_default` Docker network, internal IP `172.18.0.2`, DNS aliases
     `archnest-guacd`/`guacd`. Backend env vars: `ARCHNEST_GUACD_HOST=guacd`,
     `ARCHNEST_GUACD_PORT=4822`.
   - Diagnostic command: `docker logs -f archnest-guacd` — shows each connection attempt,
     the security mode negotiated, certificate validation results, and the final
     success/refusal message from FreeRDP (the RDP client library `guacd` uses internally).
   - Also useful: `docker exec archnest-backend env | grep ARCHNEST_GUACD`,
     `docker inspect archnest-guacd` (to confirm network/IP), `nc -zv 192.168.122.55 3389`
     (already confirmed reachable from racknerd).

2. **Fedora VM (`192.168.122.55`)** — appears to be a libvirt VM co-located on the same
   physical host as racknerd (it's in libvirt's default NAT range, and is reachable from
   racknerd over a private 192.168.x address despite racknerd otherwise looking like a public
   VPS). Running Fedora 44, GPU is a `Red Hat, Inc. Virtio 1.0 GPU (rev 01)` (confirmed via
   `lspci`). User `sam`, password `happy2026` (test/lab credentials, not a real secret).
   - RDP is served by **`gnome-remote-desktop`** (GNOME's built-in RDP/VNC daemon), running
     as a **per-user systemd service**: `systemctl --user status gnome-remote-desktop`,
     `systemctl --user restart gnome-remote-desktop`.
   - Configured via the `grdctl` CLI: `grdctl status --show-credentials`, `grdctl rdp enable`,
     `grdctl rdp set-credentials <user> <pass>`, `grdctl rdp set-tls-cert/set-tls-key`,
     `grdctl rdp disable-view-only`.
   - Diagnostic command: `journalctl --user -u gnome-remote-desktop -f` — shows the daemon's
     own startup/shutdown/error logs.
   - There is a confirmed active, unlocked, real graphical session: `loginctl list-sessions`
     showed session `51` (seat0, tty2, class `user`), and
     `loginctl show-session 51 -p Type -p State -p Active` returned
     `Type=wayland`, `Active=yes`, `State=active`. So gnome-remote-desktop has a real
     Wayland session to attach to — this is NOT a "no session" problem.

## What's already been fixed (confirmed working, do not re-investigate these)

1. **DNS**: an earlier hostname (`fedora`) didn't resolve from the backend container —
   resolved by using the IP `192.168.122.55` directly instead.
2. **Self-signed cert rejection**: FreeRDP/guacd rejected the target's self-signed RDP cert
   by default. Fixed in code — `backend/src/routes/guacamole.ts` now sets
   `settings['ignore-cert'] = 'true'` whenever `protocol === 'rdp'`. Confirmed deployed via
   `docker exec archnest-backend grep -A2 "ignore-cert" /app/dist/routes/guacamole.js`.
3. **No way to override RDP security mode**: added a `security` field to the connection
   token (`settings.security = security || 'any'`) and exposed it in the Settings UI
   (`src/pages/Settings.tsx`, field key `security`, hint text about NLA). User has tried
   `any`, `nla`, `tls`, and `rdp` — all fail identically (see below).
4. **GNOME's own RDP TLS cert was corrupt**: `journalctl` showed
   `[ERROR][com.freerdp.crypto] - [x509_utils_from_pem]: BIO_new failed for certificate` /
   `RDP server certificate is invalid`. Fixed by regenerating the cert/key on the Fedora VM:
   ```bash
   openssl req -new -newkey rsa:4096 -days 365 -nodes -x509 -subj "/CN=fedora" \
     -keyout ~/.local/share/gnome-remote-desktop/rdp-tls.key \
     -out ~/.local/share/gnome-remote-desktop/rdp-tls.crt
   grdctl rdp set-tls-cert ~/.local/share/gnome-remote-desktop/rdp-tls.crt
   grdctl rdp set-tls-key ~/.local/share/gnome-remote-desktop/rdp-tls.key
   systemctl --user restart gnome-remote-desktop
   ```
   Confirmed fixed — later journal output shows no cert error on startup.
5. **RDP sharing disabled** at the gnome-remote-desktop level (`grdctl status` showed
   `Status: disabled` even though the daemon process was running and the port was
   listening). Fixed via `grdctl rdp enable` + `systemctl --user restart
   gnome-remote-desktop`.
6. **Credentials missing / GNOME Keyring locked**: `grdctl rdp set-credentials sam happy2026`
   failed with `Cannot create an item in a locked collection` because the keyring wasn't
   unlocked (likely an artifact of an SSH-only login rather than a real unlocked graphical
   login). Fixed via:
   ```bash
   echo -n 'your-login-password' | gnome-keyring-daemon --unlock
   grdctl rdp set-credentials sam happy2026
   ```
   `grdctl status --show-credentials` now consistently shows `Unit status: active`,
   `RDP: Status: enabled`, `Username: sam`, `Password: happy2026`.

## UPDATE: connection now succeeds, but screen is blank

The "Server refused connection (wrong security type?)" failure described below has since
been resolved (cause not fully pinned down before it started working — likely one of the
cert/credential/security-mode fixes finally lined up). The ArchNest Guacamole viewer now
shows **"Connected"** in the top-right status, with the session named `Fedora-WS` — but the
viewport is **solid black**, no desktop content ever renders. Confirmed NOT a lock-screen
issue (user confirmed gnome is unlocked). `journalctl --user -u gnome-remote-desktop -n 50`
checked at the time showed the daemon has been running continuously since 10:34:45 with no
crash (unlike earlier attempts where "RDP server started" was immediately followed by
"RDP server stopped") — so this is a *different* failure mode than the original refusal:
**negotiation and session start now succeed, but no frame data is ever captured/sent.**

This is strong evidence for the EGL/Mesa/Zink theory below — the daemon accepts the
connection and starts the RDP server but apparently cannot capture real screen content,
producing a connected-but-blank session instead of crashing outright. Next diagnostic step
(not yet completed): tail `journalctl --user -u gnome-remote-desktop -f` AND
`journalctl --user -f | grep -i -E "pipewire|portal|screencast|monitor"` *live*, while the
black-screen session is open and the user clicks/moves the mouse in the Guacamole viewport,
to catch any PipeWire/portal screencast error that doesn't appear in the regular unit log.

## Original unresolved problem (superseded by the above, kept for history)

Connecting through ArchNest (browser → backend → guacd → Fedora VM) used to fail outright
with:

```
Error: Server refused connection (wrong security type?)
```

This was tried with `security` set to `any`, `nla`, `tls`, and `rdp` — **identical
failure every time**, regardless of mode. That's suspicious: if it were a genuine security
negotiation mismatch, different modes should fail differently (or some should succeed).
The fact that they all failed identically suggested the real failure might be happening
*after* security negotiation succeeds — e.g. at session-start/framebuffer-creation time —
and FreeRDP's client-side error message is a generic/misleading bucket for "the connection
didn't complete," not literally a security-type mismatch. This symptom is no longer
reproducing (see UPDATE above) — leave this section for historical context only.

### Open theory (unconfirmed)

`journalctl --user -u gnome-remote-desktop` shows, on every daemon startup, EGL/Mesa/Zink
rendering errors:
```
libEGL warning: failed to get driver name for fd -1
MESA-LOADER: failed to retrieve device information
MESA: error: ZINK: failed to choose pdev
libEGL warning: egl: failed to create dri2 screen
```
There was also one observed instance of "RDP server started" immediately followed by
"RDP server stopped" with timing consistent with an actual connection attempt. The theory
is that gnome-remote-desktop can't create a renderable framebuffer for screen capture (no
working GPU/software-render path) and crashes/aborts when a client actually tries to start
a session — which a FreeRDP client then reports as "wrong security type" because that's
the generic refusal message FreeRDP shows for several different underlying failure modes.

**This theory has NOT been confirmed.** It's a leading hypothesis based on log timing
correlation only — no one has yet proven the EGL/Mesa errors are causal vs. just noise from
gnome-remote-desktop probing GPU paths at startup (which may be harmless/expected on a
Virtio-GPU VM that falls back to software rendering anyway).

### Diagnostic step that was in progress, never completed

A direct `xfreerdp` test, bypassing guacd entirely, to isolate whether gnome-remote-desktop
rejects ANY RDP client (not just guacd/FreeRDP-via-guacd), or whether this is specific to how
guacd's embedded FreeRDP negotiates. `freerdp`/`xfreerdp` has now been installed on both
machines, but the actual test was never run/reported back. This should be your first move:

```bash
# From racknerd (mimics guacd's exact network path: container -> VM):
xfreerdp /v:192.168.122.55 /sec:tls /cert-ignore /u:sam /p:happy2026 +auth-only
xfreerdp /v:192.168.122.55 /sec:nla /cert-ignore /u:sam /p:happy2026 +auth-only
xfreerdp /v:192.168.122.55 /sec:rdp /cert-ignore /u:sam /p:happy2026 +auth-only

# From the Fedora VM itself (rules out networking, tests gnome-remote-desktop alone):
xfreerdp /v:localhost /sec:tls /cert-ignore /u:sam /p:happy2026 +auth-only
```

Run these WHILE simultaneously tailing both:
```bash
# on racknerd:
docker logs -f archnest-guacd
# on the Fedora VM:
journalctl --user -u gnome-remote-desktop -f
```

Correlate the exact moment of failure across both logs. This is the single most valuable
piece of evidence currently missing.

## Instructions

1. Get hands-on access to both `racknerd-712b73a` and the Fedora VM (`192.168.122.55`).
2. Run the `xfreerdp` direct tests above, with both logs tailing simultaneously, and read
   the actual FreeRDP client-side error output (not just "wrong security type" — xfreerdp's
   raw stderr/exit code will usually have more detail than what bubbles up through
   guacd/Guacamole's client to the ArchNest UI).
3. If `xfreerdp` succeeds where ArchNest's guac connection fails, the bug is in how
   `backend/src/routes/guacamole.ts` builds the connection settings/token, or in the
   `guacamole-lite`/`guacd` version compatibility — debug from there, comparing exactly what
   settings xfreerdp used successfully vs. what ArchNest sends.
4. If `xfreerdp` *also* fails identically, the problem is squarely on the
   gnome-remote-desktop / Fedora VM side. Investigate the EGL/Mesa/Zink rendering theory
   directly — check whether software rendering (llvmpipe) is available
   (`glxinfo -B` from an actual Wayland session, not an SSH shell — note: an earlier attempt
   from an SSH shell failed with `Error: unable to open display`, which is expected and not
   informative; you need to run it from within session 51 or equivalent), and whether the
   VM's libvirt XML has virtio-gpu with working 3D/virgl acceleration configured on the
   hypervisor side.
5. If gnome-remote-desktop turns out to be fundamentally unable to serve a real client
   (vs. screen-sharing GNOME's own "Remote Login" feature, which is its primary intended use
   case), consider recommending **xrdp** as a replacement RDP server on the Fedora VM, and
   note this in your report as a general product recommendation (since other ArchNest users
   may hit the same gnome-remote-desktop limitation).
6. Keep ArchNest's product goal in mind throughout: any fix that's specific to *this* user's
   VM is fine for unblocking them, but if you find a root cause that's likely to recur for
   other users (e.g. a guacd config default, a missing Settings field, a code bug in
   `backend/src/routes/guacamole.ts`), make the corresponding code/config fix in this repo,
   not just a one-off operational fix on this VM.

## What to report back when done

Write a concise report (for the engineer/AI who handed this off) covering:
- The root cause, with the specific log lines/evidence that proved it (not just a theory).
- The exact fix applied, including any commands run on either machine and any code changes
  made in this repo (with file paths and diffs).
- Whether the fix is specific to this VM or represents a general product issue that other
  ArchNest users could hit — and if general, what was changed in the codebase to address it.
- Current working/non-working status of the connection after the fix, with the actual test
  performed to confirm it works end-to-end through ArchNest's UI (not just via direct
  `xfreerdp`).